DN 38- 150 Interlock Hose Stripwound Hose Exhaust Pipe Making Machine#

DN 38- 150 Interlock Hose   Stripwound Hose   Exhaust Pipe Making Machine#

DN 38- one hundred fifty Interlock Hose / Stripwound Hose / Exhaust Pipe Making Device#

1. Merchandise Information

What can our equipment create?

1. Round Interlock Hose (2S & 3S)
2. Polygonal Interlock Hose (2S & 3S)
three. Interlock Hose with Yarm
four. Car / Boat Motor Versatile Exhaust Pipe


two. CZPT Parameter

a. Equipment No.one:

Machine Kind CF-150
Available Condition Round or polygonal with various forming dies
Dimension variety ID38-one hundred fifty
Forming pace a hundred and fifty-350m/8hrs
Strip thickness .twenty five-.5mm
Strip width 16 and 20mm
Electrical power 4KW
Outer dimensions 3500mmX1200X1600mm
Weight 950kgs

b. Equipment No.2:

Equipment Variety CF-three hundred
Available Shape Round or polygonal with diverse forming dies
Size range ID150-300
Forming pace 100-200m/8hrs
Strip thickness .25-.8mm
Strip width sixteen,20, 28, 32mm
Electricity 11KW
Outer proportions 3500mmX1200X1600mm
Excess weight 1200kgs

c. Other Types’ Parameter


Generating measurement/mm ID38-one hundred fifty ID75-three hundred ID200-400 ID38-sixty five
Speed M/H a hundred-one hundred twenty one hundred fifty-400 one hundred-a hundred and twenty one hundred fifty-400
Strip dimensions /mm 16-20*.twenty five-.5 twenty*.45m 28*.5-.eight 15*.twenty five
Variety Polygonal Round spherical polygonal

three. Device Instruction

Principal: the machine integrated innovative technological innovation, the universal wheels and 4 pairs of forming wheels will be used to form the hose action by phase. The dimensions of the interlock hose will be exact same as forming mould.
one. Seven pairs of wheels are all transmission wheels (refers to wheel drawings), the initial pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed also tough to prevent also fast feeding.The allowable tolerance in each sides can not be far more than .3mm. The third pair are folding wheels(refers to drawing 3),the folding diploma of asymmetry will not be far more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and formed to be 90° angle. The fifth pair (refer to drawing five) will make 90° angle strip 60° angle.
2. Following the strip goes by means of 7 pairs of wheels, wind and correct the strip on the forming mildew, and then press the slot step by step with seven pressing wheels. Operate the device slowly and gradually till the right hose arrives out.
3.The transmission wheels have been adjusted ahead of shipping and delivery from the factory.

When modifying the four centre urgent wheels, you should be aware: the 1st pair can not be also restricted, then the second will be tighter than 1st, the other will be by the very same way.
The turning route of middle urgent wheels:

Altering Process:
The seven pairs of wheels(one-7) will be positioned with spacers, the higher wheel should be in the same center line with reduced wheel, do not fix them. There are spacers within decrease wheels which have been modified ahead of delivery. The spacers exterior the wheels will be pressed by the nuts. The spacers of various thickness will be employed to make positive the lower wheel just in the middle of the strip and both sides folded equally. The five pairs of wheels have to be pressed down parallelly with identical power. Make sure the strips are not destroyed when pressing down the wheels.
Do not fasten the nuts on the pressing equipment to hold the spring inside can move freely.
You want to put gasket when it is needed to make tight interlock hose.
When change the transmission wheels, it is required to free all wheels, and then enable the wheels tumble down freely and then fasten.
Hold the distance in between pressing wheel help and the huge plate of the machine 1.5mm a single than another clockwise.(for 3-s machine, it will be one.0mm)

  1. Incorporate the grease in the chain wheel and chain just before start-up and maintain the shaft and chain are greased properly.
  2. Operate the machine with uniform velocity, never speed up or minimize the velocity out of the blue. When start off up the equipment, the speed should be less than 400r/min and max. velocity must not be a lot more than 800r/min.
  3. Lower off the energy supply when the device is not managing.
  4. Fasten the nuts on the wheels and stop them from sliding and keep examine to make positive.

4. Business Overview

Comflex CZPT Co.,Ltd

We supply all kinds of equipment connected to hoses, bellows, and cloth enlargement joints with a lot more than 35 many years. Meanwhile, we can also style and manufacture particular products in accordance your special prerequisite. Our devices have been exported to several countries, such as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, Uk, Turkey, and many others.. We guarantee you extended-expression mutual beneficial cooperation partnership!

5. Application

Exhaust hose making device are extensively utilized to manufacturing exhaust pipe or flex connectors for the truck. In contrast with interlock ASS hose, the three-s hose has the pursuing features:

  • Low leakage
  • Much better sealing functionality
  • Adaptable
  • Exhaust connector, Exhaust pipe for the truck.
    CZPT flexible metallic hose creating.
  • SS & sss variety, spherical & polygonal sort



Produce speed/hr

Strip size(width*thickness)







two hundred








one hundred fifteen








a hundred




one hundred



45,fifty one,55mm 

a hundred







89,ninety five,102mm



6. Packing & Supply

seven. CZPTer Go to

8. Certification

FAQ for interlock hose making machine

Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience

Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
    Squarelock hose making machine
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines

We need to know the following information to quote you correct machinery:

Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.

Q:Hose size range
A:Such as:DN8-DN200

Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel

Q:Product type
A:Spherical/Polygonal interlock hose

DN 38- 150 Interlock Hose   Stripwound Hose   Exhaust Pipe Making Machine#