Tag Archives: agricultural chain forged

China China Factory K3 Grade Forged Open Link Studless Anchor Chain for Marine Ship agricultural roller chain

Solution Description

Solution Description

 

 

 

 

Open up Link ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Materials: (U1:CM370 U2:CM490 U3: CM690)
Open Hyperlink ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,Hyperlink Dimension(6*3.6D),Take a look at LOAD AND Excess weight
D(φ) DIANMETER CHAIN Website link Size BM1 U1 Open Hyperlink CHAIN BM2 U2 Open Url CHAIN BM3 U3 Open up Website link CHAIN APPROX Bodyweight
Outside Size Outside WIDTH Proof LOAD BREACKING LOAD Proof LOAD BREACKING LOAD Proof LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
1/two twelve.five 75 45 28.75 57.81 forty one.two eighty two.six fifty six.four 112.8 85.forty one
9/16 fourteen 84 50.four 34.78 69.93 51 a hundred and one.nine 70.76 141.fifty one 106.55
5/eight 16 ninety six fifty seven.six forty seven.1 94.seventy two sixty six.2 132.8 ninety two.94 184.eighty three 139.43
11/sixteen 17.five one hundred and five 63 56.35 113.31 seventy eight.89 157.seventy eight a hundred and ten.fifty five 221.one 178.35
three/four 19 114 68.four 66.forty two 133.fifty seven ninety three.six 187.2 130.32 260.sixty four 217.sixty eight
thirteen/sixteen 20.5 123 seventy three.8 seventy seven.33 155.forty nine 108.64 217.27 151.seven 303.42 229.fourteen
seven/8 22 132 seventy nine.two 89.06 179.08 125.four 250.9 174.four 349.four 264.49
fifteen/16 24 one hundred forty four 86.4 a hundred and five.98 213.twenty five 149.nine 298.9 207.nine 415.eight 341.82
one 1/sixteen 26 156 ninety three.6 124.38 250.12 175.4 350.8 244 488 369.ninety four
1 1/eight 28 168 one hundred.8 144.26 290.08 203.eight 406.seven 283 566 427.04
one 3/sixteen thirty one hundred eighty 108 one hundred sixty five.6 333 234.2 467.five 324.nine 649.eight 490.98
one 1/4 32 192 115.2 188.forty two 378.88 265.six 531.2 396.six 739.3 559.sixty five
one 5/sixteen 34 204 122.4 212.7 427.seventy two 299.9 599.8 417.three 834.six 671.52
one 7/sixteen 36 216 129.6 238.46 479.52 336.one 672.3 467.eight 935.seven 707.85
1 1/2 38 228 136.eight 265.7 534.28 374.four 748.7 521.three 1042.5 788.ninety eight
1 9/16 forty 240 one hundred forty four 294.four 592 414.4 829.1 577.6 1155.two 869.36
one 5/eight 42 252 151.2 324.fifty eight 652.sixty eight 457.7 915.3 636.8 1273.6 959.three
one 3/4 forty four 264 158.4 356.22 716.32 502.7 999.six 698.9 1398 1111.twenty five
one thirteen/sixteen forty six 276 a hundred sixty five.6 389.34 782.92 548.8 1097.6 763.nine 1527.eight 1152.07
1 7/8 forty eight 288 172.eight 423.94 852.48 597.8 1195.six 831.7 1663.five 1256.26
two 50 300 180 460 926.09 648.eight 1293.6 902.five 1805 1360.41
2 1/16 52 312 187.2 497.fifty four one thousand.five 697.63 1395.three 976.14 1952.28 1485.61
2 1/8 fifty four 324 194.four 536.fifty four 1078.nine 752.33 1504.seven 1052.68 2105.36 1648.08
2 3/16 56 336 201.6 577.02 1160.3 809.09 1618.two 1132.one 2264.2 1715.ninety seven
two 5/16 fifty eight 348 208.8 618.98 1244.seven 867.ninety one 1735.eight 1214.four 2428.eight 1844.5
2 3/8 sixty 360 216 662.four 1332 928.eight 1857.6 1299.6 2599.2 1973.29
2 7/16 sixty two 372 223.two 707.3 1422.three 991.75 1983.5 1387.68 2775.36 2101.fifty six
2 1/two sixty four 384 230.4 753.sixty six 1515.5 1056.eight 2113.5 1478.66 2957.32 2298.47
2 9/sixteen 66 396 237.6 801.five 1611.seven 1123.nine 2247.seven 1572.fifty two 3145.04 2398.1
two eleven/16 sixty eight 408 244.8 850.eighty two 1710.9 1193 2386 1669.26 3338.fifty two 2522.88
2 3/four 70 420 252 901.6 1813 1264.two 2528.four 1786.nine 3537.8 2697.sixty five
                     

      

 

……………………………………………………………………………………………………..

 

 

 

 

 

 

 

To Be Negotiated 50 Meters
(Min. Order)

###

After-sales Service: Negbotiable
Warranty: Negbotiable
Application: Boat Yacht Mooring
Process: Welded Steel
Certificate: CCS.ABS.Lrs.BV.Gl.Dnv.Nk
Color: Black or Galvanized

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

###

###

OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Material: (U1:CM370; U2:CM490; U3: CM690)
OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,LINK SIZE(6*3.6D),TEST LOAD AND WEIGHT
D(φ) DIANMETER CHAIN LINK SIZE BM1 U1 OPEN LINK CHAIN BM2 U2 OPEN LINK CHAIN BM3 U3 OPEN LINK CHAIN APPROX WEIGHT
OUTSIDE LENGTH OUTSIDE WIDTH PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
1/2 12.5 75 45 28.75 57.81 41.2 82.6 56.4 112.8 85.41
9/16 14 84 50.4 34.78 69.93 51 101.9 70.76 141.51 106.55
5/8 16 96 57.6 47.1 94.72 66.2 132.8 92.94 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.1 178.35
3/4 19 114 68.4 66.42 133.57 93.6 187.2 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.7 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.4 250.9 174.4 349.4 264.49
15/16 24 144 86.4 105.98 213.25 149.9 298.9 207.9 415.8 341.82
1 1/16 26 156 93.6 124.38 250.12 175.4 350.8 244 488 369.94
1 1/8 28 168 100.8 144.26 290.08 203.8 406.7 283 566 427.04
1 3/16 30 180 108 165.6 333 234.2 467.5 324.9 649.8 490.98
1 1/4 32 192 115.2 188.42 378.88 265.6 531.2 396.6 739.3 559.65
1 5/16 34 204 122.4 212.7 427.72 299.9 599.8 417.3 834.6 671.52
1 7/16 36 216 129.6 238.46 479.52 336.1 672.3 467.8 935.7 707.85
1 1/2 38 228 136.8 265.7 534.28 374.4 748.7 521.3 1042.5 788.98
1 9/16 40 240 144 294.4 592 414.4 829.1 577.6 1155.2 869.36
1 5/8 42 252 151.2 324.58 652.68 457.7 915.3 636.8 1273.6 959.3
1 3/4 44 264 158.4 356.22 716.32 502.7 999.6 698.9 1398 1111.25
1 13/16 46 276 165.6 389.34 782.92 548.8 1097.6 763.9 1527.8 1152.07
1 7/8 48 288 172.8 423.94 852.48 597.8 1195.6 831.7 1663.5 1256.26
2 50 300 180 460 926.09 648.8 1293.6 902.5 1805 1360.41
2 1/16 52 312 187.2 497.54 1000.5 697.63 1395.3 976.14 1952.28 1485.61
2 1/8 54 324 194.4 536.54 1078.9 752.33 1504.7 1052.68 2105.36 1648.08
2 3/16 56 336 201.6 577.02 1160.3 809.09 1618.2 1132.1 2264.2 1715.97
2 5/16 58 348 208.8 618.98 1244.7 867.91 1735.8 1214.4 2428.8 1844.5
2 3/8 60 360 216 662.4 1332 928.8 1857.6 1299.6 2599.2 1973.29
2 7/16 62 372 223.2 707.3 1422.3 991.75 1983.5 1387.68 2775.36 2101.56
2 1/2 64 384 230.4 753.66 1515.5 1056.8 2113.5 1478.66 2957.32 2298.47
2 9/16 66 396 237.6 801.5 1611.7 1123.9 2247.7 1572.52 3145.04 2398.1
2 11/16 68 408 244.8 850.82 1710.9 1193 2386 1669.26 3338.52 2522.88
2 3/4 70 420 252 901.6 1813 1264.2 2528.4 1786.9 3537.8 2697.65
                     
To Be Negotiated 50 Meters
(Min. Order)

###

After-sales Service: Negbotiable
Warranty: Negbotiable
Application: Boat Yacht Mooring
Process: Welded Steel
Certificate: CCS.ABS.Lrs.BV.Gl.Dnv.Nk
Color: Black or Galvanized

###

Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

###

###

OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN
Material: (U1:CM370; U2:CM490; U3: CM690)
OPEN LINK ANCHOR CHAIN/STUDLESS ANCHOR CHAIN,LINK SIZE(6*3.6D),TEST LOAD AND WEIGHT
D(φ) DIANMETER CHAIN LINK SIZE BM1 U1 OPEN LINK CHAIN BM2 U2 OPEN LINK CHAIN BM3 U3 OPEN LINK CHAIN APPROX WEIGHT
OUTSIDE LENGTH OUTSIDE WIDTH PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD PROOF LOAD BREACKING LOAD 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
1/2 12.5 75 45 28.75 57.81 41.2 82.6 56.4 112.8 85.41
9/16 14 84 50.4 34.78 69.93 51 101.9 70.76 141.51 106.55
5/8 16 96 57.6 47.1 94.72 66.2 132.8 92.94 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.1 178.35
3/4 19 114 68.4 66.42 133.57 93.6 187.2 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.7 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.4 250.9 174.4 349.4 264.49
15/16 24 144 86.4 105.98 213.25 149.9 298.9 207.9 415.8 341.82
1 1/16 26 156 93.6 124.38 250.12 175.4 350.8 244 488 369.94
1 1/8 28 168 100.8 144.26 290.08 203.8 406.7 283 566 427.04
1 3/16 30 180 108 165.6 333 234.2 467.5 324.9 649.8 490.98
1 1/4 32 192 115.2 188.42 378.88 265.6 531.2 396.6 739.3 559.65
1 5/16 34 204 122.4 212.7 427.72 299.9 599.8 417.3 834.6 671.52
1 7/16 36 216 129.6 238.46 479.52 336.1 672.3 467.8 935.7 707.85
1 1/2 38 228 136.8 265.7 534.28 374.4 748.7 521.3 1042.5 788.98
1 9/16 40 240 144 294.4 592 414.4 829.1 577.6 1155.2 869.36
1 5/8 42 252 151.2 324.58 652.68 457.7 915.3 636.8 1273.6 959.3
1 3/4 44 264 158.4 356.22 716.32 502.7 999.6 698.9 1398 1111.25
1 13/16 46 276 165.6 389.34 782.92 548.8 1097.6 763.9 1527.8 1152.07
1 7/8 48 288 172.8 423.94 852.48 597.8 1195.6 831.7 1663.5 1256.26
2 50 300 180 460 926.09 648.8 1293.6 902.5 1805 1360.41
2 1/16 52 312 187.2 497.54 1000.5 697.63 1395.3 976.14 1952.28 1485.61
2 1/8 54 324 194.4 536.54 1078.9 752.33 1504.7 1052.68 2105.36 1648.08
2 3/16 56 336 201.6 577.02 1160.3 809.09 1618.2 1132.1 2264.2 1715.97
2 5/16 58 348 208.8 618.98 1244.7 867.91 1735.8 1214.4 2428.8 1844.5
2 3/8 60 360 216 662.4 1332 928.8 1857.6 1299.6 2599.2 1973.29
2 7/16 62 372 223.2 707.3 1422.3 991.75 1983.5 1387.68 2775.36 2101.56
2 1/2 64 384 230.4 753.66 1515.5 1056.8 2113.5 1478.66 2957.32 2298.47
2 9/16 66 396 237.6 801.5 1611.7 1123.9 2247.7 1572.52 3145.04 2398.1
2 11/16 68 408 244.8 850.82 1710.9 1193 2386 1669.26 3338.52 2522.88
2 3/4 70 420 252 901.6 1813 1264.2 2528.4 1786.9 3537.8 2697.65
                     

How to choose a drive chain

The process of manufacturing a drive chain starts with bushing. Both inner and outer diameters are strictly measured to ensure tight tolerances. The roundness of the bushing is critical as irregular surfaces in the contact area can cause accelerated wear and shorten chain life. That’s why the CZPT manufacturing process is carefully designed to optimize the wear performance of the chain. There are several types of bushings including roller, forged rivetless, flat top, and timing.
chain

roller chain

The tensile strength of a roller chain is the number of pounds it can withstand before breaking. Fatigue strength is equally important, although the two do not necessarily go hand in hand. Fatigue strength depends on several factors, including the quality of steel used in manufacturing, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the link plates. Here are some things to consider when choosing a roller chain for a drive chain.
When sizing a chain, first determine how much power will be delivered. Then, determine how many teeth you need for the drive sprocket. The gear ratio is approximately 2:1. The number of sprocket teeth depends on the size of the motor. A chain with a higher tooth count requires fewer teeth than a smaller chain. The size of the drive sprocket also depends on the horsepower of the motor.
Before installing rollers or conveyor chains, make sure the drive system is properly aligned. If the drive chain is misaligned, the load on other components will be uneven. This can cause excessive wear on the sprocket or roller chain. Also, check that the sprocket is as close to the bearing as possible. Connecting links can be secured using openings or spring clips.
Different manufacturing processes can affect the performance of the roller chain. Some manufacturers have chains pre-installed at the factory to minimize initial stretch. Others build chains by preloading sprockets and ensuring consistent precision heat treatment. The final product may have greater elongation or less wear than previous products. It is best to follow the manufacturer’s recommendations to extend the life of the roller chain. If you are interested in purchasing a new drive chain, please contact a trusted supplier in your area.

Drop forged rivetless chain

Forged rivetless drive chains are ideal for applications where flexibility and strength are critical. The chain consists of forged steel components for high strength and lightweight. These chain assemblies are easy to assemble without the use of tools and are commonly used on carts, assembly lines, and drag conveyors. They are also compatible with related chain, drive, and accessory products. They have a short turning radius and therefore high flexibility and strength.
The X-348 Forged Rivetless Chain is an example of such a drive chain. This chain is perfect for automated machines that run late at night. It is available in a variety of weight limits and sizes. The chain is pre-stressed after assembly, and a two-year parts replacement warranty is standard. Its durability is also enhanced by the inclusion of push dogs that engage the front floating dogs on the leading free cart.
In addition to this type of chain, CZPT also offers a full line of Caterpillar Drive chains. They are designed to provide fatigue-free operation. The drive jaws are one-piece forged induction hardened steel compatible with forged rivetless chains. There are many special custom chains to choose from. These forged chains can be installed on Caterpillars as well as other types of tractors for maximum durability and efficiency.
Distributors of forged chain products offer a variety of sizes, pitches, and materials for material handling and conveying systems. Typically, this type of chain is used in conveyor and lifting applications and ranges from 3 inches to 9 inches. Depending on size and thickness, it is ideal for a variety of industries including automotive, food, paper, and steel mills. In addition, the chain is corrosion-resistant and corrosion-free.
chain

flat top chain

The flat-top drive chain is used for conveying large and medium workpiece pallets. These chains are available in a variety of materials and designs, including plastic, steel, and stainless steel. The steel flat top chain provides high wear resistance and excellent noise reduction. Steel flat-top chains are suitable for applications requiring high loads and excellent workmanship. HD profiles are compatible with steel flat-top chains and are highly recommended for extreme applications.
CZPT produces two types of flat-top chains. Tabletop chains are similar to wing door hinges, while MatTop chains are assembled using full-width pins. Both types are available in standard widths of 3.25 to 12 inches and are shipped in 10-foot sections. Both types can be shaped according to the width of the chain.
Double hinge pin flat-top chains are available with a variety of hinge pins. There are TAB and standard hinge pins for different machines and drive methods. A flat-top chain with dual-hinge pins will provide higher load carrying capacity, but be aware of the hinge pin size and style required for your application. The hinge pins should be long enough to ensure a smooth and smooth delivery. Double hinge pin flat top drive chains are available in a variety of sizes and designs.
Using standardized components and modules, the flat-top chain conveyor system is highly adaptable and can be seamlessly integrated into any production process. It can also be extended to handle a wider range of containers. Using a single drive, the CZPT system can be extended to a length of 40 meters. Its versatility makes it the choice of many industries. There is also a wide variety of flat-top drive chains to choose from.

time chain

The drive chain is a critical component of any internal combustion engine. They transmit the rotation of the crankshaft to the camshaft via the timing chain. These chains have been standard in cars since the turn of the 20th century, and while toothed belts have become a more cost-effective alternative, manufacturers such as Mercedes-Benz and BMW remain loyal to traditional chain drives.
Timing chains come in many shapes and sizes, with different designs depending on the type of load they must carry. Roller chains are the most common and offer an excellent balance of strength and NVH performance. Its design is similar to a bicycle chain, and the inner link consists of two blades pressed into the holes of the sprocket. Roller chains can also pass through smaller diameter sprockets, and roller chains take up less space than chain links.
The length of the chain allows it to stretch over time. In addition, improper oil maintenance can lead to premature timing chain damage. Without an oil change, the chain is not lubricated, causing the rollers and links to rub against each other. This can cause excessive chain wear and eventually chain breakage. To avoid premature timing chain failure, it is advisable to have your vehicle inspected by a mechanic.
For automotive timing chains, the CZPT website offers the best prices for the timing chain you need. You can find the right timing chain for your car by registering on this website. You can also contact a mechanic to get the parts you need. If you don’t know how to diagnose your timing mechanism, you can always check the owner’s manual or the manufacturer’s website. It is critical to follow the manufacturer’s recommendations to avoid catastrophic failure.
chain

Oil-impregnated bushing

Oil-impregnated bushings for drive chains are an excellent solution to drive chain lubrication problems. Usually, drive chains require additional lubrication, but by adding special oil-impregnated bushings, the chain can run without lubrication. Oil-immersed bushings, such as those of the CZPT brand for CZPT, are specially manufactured for this purpose. They capture oil during operation and release it onto the bearing surfaces, returning it to the bushing by capillary action.
Since their introduction to the automotive industry, engineered composite plastic bushings have been shown to provide longer service life and save up to 40% in maintenance costs. They have replaced bronze in thousands of applications, including pumps, medical equipment, and food processing machinery. Because oil-impregnated bronze bearings rely on capillary action, they must rotate to maintain a complete lubricating film. However, several factors prevent this film from fully forming, including low speeds and intermittent use.
During the manufacturing process, oil-impregnated bushings are manufactured to meet the wear resistance requirements of the drive chain. The sintered density of the oil-impregnated sintered bushing determines its mechanical strength. The larger sintered density increases the wear resistance of the oil-impregnated bushing but reduces the mechanical strength.
Whether or not a drive chain is lubricated will determine its overall life. Proper lubrication can extend chain life by 100% compared to a chain without proper lubrication. Proper lubrication means using high-quality oils without additives and oils that flow freely at prevailing temperatures. Indirect heating is required by immersing the drive chain in the molten pool as certain additives prevent oil from entering the chain joint.

China China Factory K3 Grade Forged Open Link Studless Anchor Chain for Marine Ship     agricultural roller chainChina China Factory K3 Grade Forged Open Link Studless Anchor Chain for Marine Ship     agricultural roller chain
editor by czh 2023-01-15